19,0 gram


Closure system

Tamper Evident Tab, Snap-on, Protective collar

96,8 mm

73,9 mm

Unit Scantainer Box
Pcs. 5.664 736
Units per pallet 1 15
Pcs. / pallet 5.664 11.040
Unit size mm 1200 x 800 x 1080 (WxLxH) 800 x 400 x 450 (WxLxH)
Pallet height mm 1200 x 800 x 1230 (WxLxH 1200 x 800 x 2400 (WxLxH


Toppac standard colours.

The needed strength in the product is different and there are several different factors to consider in each situation. Toppac strongly recommends customers to make their own trials and tests to ensure strength during packing, stacking, shipping and the durability of the product itself.



Hot filling:

The material chosen has a very good resistance and the packaging is suitable for hot filling. Product temperature 85-95°C. It is the responsibility of the customer to test actual product in real temperature before approval for use.

Cold products:
Random PP resists to 5°C. Block PP resists temperature to – 20°C. It is the responsibility of the customer to test actual product in real temperature before approval for use.


Within the industry, deviations in the product specification according to this datasheet of 0.025% (25 pcs. per 100.000 pcs.) are considered acceptable. Within this margin it is not seen as a defect. We also refer you to our Standard Terms and Conditions.

Shelf life:

The compliance of the product to the technical specifications in this data sheet is guaranteed for 12 months from date of delivery. After this period we cannot be held responsible for use of the product. Suitable storage conditions are protection from direct sunlight, rain, very low temperatures or very high temperatures over a long period.


All Toppac products comply with the European Union Commission Regulation No. 10/2011/EC with amendments, relating to materials and articles intended for food contact, unless otherwise stated. In accordance to EU legislation, it is the responsibility of the customer to ensure that the supplied product is suitable for the intended use.

Miljøet er vigtigt

We focus on the environment all the way around the packaging

The many different products are recyclable plastic. An injection-molded, sustainable packaging must also be able to stand the environmental distance when we talk about various labels and prints.